The basis is a very contemporary lithium ion battery specially designed for heavy-duty construction work and providing enough power for all the work an average workday requires on a single machine. Two models of the rechargeable battery with different powers – BP1000 and BP1400 – now form the heart of seven devices and can be replaced in no time; thus, the operator can replace the discharged battery with a charged one within a few seconds. Whether internal vibrators IEe, vibratory plates AP2560e, AP1840e or AP1850e as well as the battery-powered rammers AS30e, AS50e and AS60e: Thanks to the modular system with rechargeable battery, they are all ready for use at any time.
ACBe / IEe: Concrete consolidation with carrying comfort
Hikers or mountain travelers will appreciate the quality of a good backpack. Together with a leading backpack manufacturer, Wacker Neuson has developed an ergonomic and back-friendly carrying system for the battery of a portable zero emission internal vibrator with electric motor for end users in building construction. In this way, independent and wireless working is possible: There are no tripping hazards caused by cable connections between external converter as well as power distributor and internal vibrator. There is also no need to relocate the converter when the site of application is changed. The internal vibrator with battery-carrying backpack shall be available for market launch by fall 2019 in two standard hose lengths (1.5 and 3 meters) and with vibrator heads in three different diameters (38, 45 and 58 millimeters).
Battery-powered rammer AS60e complements rammer duo with electric motor
For applications in trenches, inside buildings and in noise-reduced zones, the range of vibratory rammers has been extended by the AS60e to in all three vibratory rammers with electric motors: The smaller AS30e model is a special rammer for compacting pipe spandrels, while the larger vibratory rammer AS50e as well as the new AS60e is used for all classic ramming jobs. The compaction performance corresponds to the gasoline vibratory rammers of the same size class. Because of the zero emissions, strict requirements, e.g. for urban construction areas or working in trenches, are not an issue. An additional advantage is the low operating cost: Around 55 percent of energy costs can also be saved by operating with electricity instead of gasoline. In addition, the engine is completely maintenance-free and all the typical maintenance costs of conventional vibratory rammers, e.g. on the carburetor, are not incurred by the battery rammer.
Battery-powered plate 2560e
After Wacker Neuson extended the zero emission range in the year 2018 by the single direction battery-powered vibratory plates AP1840e and AP1850e, the AP2560e model now follows. With an operating width of 600 millimeters, it is the specialist for vibrating interlocking paving stones, but can also be used for classic compaction work on granular soils. In addition, it also facilitates work indoors and in other emission-sensitive areas, such as in trenches, sheeting and bracings. The battery-powered vibratory plate is also suitable for application in water protection areas, since no combustion engines may be used there.
Fit for the future
Electric drives are becoming increasingly important in the construction industry. With its zero emission range, Wacker Neuson offers a comprehensive range of electrically powered machines and equipment for zero emission operation on an entire construction site, including wheel loaders, track dumpers, wheel dumpers and mini-excavators.
More information can be found at www.wackerneuson.com/zeroemission